 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| STA60K7.9P thru STA60K100P SOLID STATE DEVICES, INC. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 Designer's Data Sheet FEATURES: * 7.90-100 Volt Bidirectional * Smaller than Microsemi 60KS200C Types * Hermetically Sealed * Meets all environmental requirements of MIL-PRF-19500 * Custom configurations available * TX and TXV Screening Available 60,000 WATTS PEAK PULSE POWER 7.9 - 100 VOLTS LOW VOLTAGE BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR APPLICATIONS: *Protection of Voltage Sensitive Components *Protection Against Power Interuption *Lightning Protection MMAXIMUM RATINGS Stand Off Voltage Steady State Power Dissipation Peak Pulse Power @ 1.0 msec Peak Pulse Power and Steady State Power Derating Peak Pulse Power and Pulse Width Peak Pulse Power and Pulse Width VRWM PD PPP 5.6-75 400 V W W 60,000 See Graph See Graph -65C to +175C Note: SSDI Transient Suppressors offer standard Breakdown Voltage Tolerances of + 10% (A) and + 5% (B). For other Voltage and Voltage Tolerances, contact SSDI's Marketing Department Package shown is standard configuration. SSDI can custom design your module with terminals that meet your unique design criteria. Additionally, SSDI can package these devices with an irregular footprint or offset mounting positions. This data sheet is meant to serve as an example of SSDI's Transient Protection Module Capabilities. For custom configurations, please contact SSDI's Marketing Department. PEAK PULSE POWER VS. TEMPERATURE DERATING CURVE PEAK PULSE POWER (% Rated 25C Power) AMBIENT TEMPERATURE (C) NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: T00008C RMD STA60K7.9P thru STA60K100P Electrical Characteristics Part Number For 5% Voltage Tolerance specify "B" in place of A SOLID STATE DEVICES, INC. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 Break Down (note 1) Max Reverse Stand Off Peak Pulse Clamping Nominal Voltage Test Current Voltage Reverse Leakage Current Voltage (max) @ Current tp=1ms (note 4) Maximum Continuous Current (note 3) Dynamic Impedance (note 2) Maximum Termperature Coefficient V BR Volts 7.9 8.9 9.8 10.7 11.0 12.7 13.5 15.0 16.7 18.0 20.2 22.6 24.5 27.9 30.5 34.0 36.0 39.0 45.0 49.0 51.0 57.0 62.0 68.0 75.0 82.0 91.0 100.0 @I BRT A 7.0 6.0 6.0 5.0 5.0 4.0 4.0 3.0 3.0 2.6 2.6 2.0 2.0 2.0 1.6 1.6 1.2 1.2 1.2 1.0 1.0 0.8 0.8 0.8 0.8 0.6 0.6 0.6 VRWM Volts 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 IR @ VRWM mA 60 48 1.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 VC Volts 14.5 15.0 16.0 17.5 18.5 19.5 21.0 23.0 25.0 27.0 30.0 33.5 36.0 40.0 43.5 47.0 52.0 55.0 60.0 65.0 70.0 78.0 87.0 93.0 103.3 113.5 126.5 138.5 IPP A 5120 4800 4360 4000 3720 3480 3160 2720 2560 2280 2080 1880 1720 1560 1400 1280 1200 1080 1000 920 840 760 680 640 560 520 480 440 I RM A 28 30 33 38 43 45 48 48 48 50 63 70 75 95 125 175 200 175 250 300 350 450 500 550 625 750 1000 1125 ZBR @ IBRT Ohms 0.07 0.08 0.09 0.10 0.11 0.11 0.12 0.12 0.13 0.13 0.15 0.16 0.18 0.25 0.40 0.50 0.60 0.70 1.0 1.2 1.4 1.8 2.0 2.2 2.5 3.0 4.0 4.5 TC % / C .03 .03 .03 .05 .05 .05 .05 .05 .06 .06 .06 .06 .06 .06 .06 .06 .06 .06 .06 .07 .07 .07 .07 .08 .08 .08 .08 .09 STA60K7.9P STA60K8.9P STA60K9.8P STA60K10.7P STA60K11P STA60K12.7P STA60K13.5P STA60K15P STA60K16.7P STA60K18P STA60K20.2P STA60K22.6P STA60K24.5P STA60K27.9P STA60K30.5P STA60K34P STA60K36P STA60K39P STA60K45P STA60K49P STA60K51P STA60K57P STA60K62P STA60K68P STA60K75P STA60K82P STA60K91P STA60K100P PEAK PULSE POWER VS. PULSE WIDTH PEAK PULSE POWER (KW) CURRENT PULSE WAVEFORM STEADY STATE POWER STEADY STATE POWER DERATING (% of 25c rated power) % PEAK VALUE CASE TEMPERATURE (C) PULSE WIDTH For optional high reliability screening or higher zener voltages, consult SSDI MARKETING Department. Notes: 1 . All voltages are measured with automated test set using 35 msec test time. Longer or shorter test times will have a corresponding effect on the measured value due to heating effects. 2 . Dynamic impedance is derived from the AC voltage divided by the AC current with RMS value of 10% of DC test current superimposed on the test current. 3 . Ratings based on 25 C case temperature. 4 . Pulse width (tp) is delined as the time from rated peak pulse current IPP to the point where peak pulse current decayed to 50% of rated IPP. |
Price & Availability of STA60K89P
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |